Cleaning method
External cleaning
After daily use, the exterior of the device may be contaminated with dust, fingerprints and other stains. When cleaning, make sure the equipment is turned off and the charging cable is disconnected first. Wipe the outer shell with a soft, slightly damp and clean cloth to remove surface stains. Avoid using rough or abrasive cleaning tools to prevent scratching the equipment. For stubborn stains, you can add a small amount of mild detergent to water, soak a cloth in it, wring it out and wipe it, then dry it with a clean cloth. Be careful not to let moisture seep into the interior of the equipment.
Cleaning of the suction nozzle
The suction nozzle comes into direct contact with the mouth and needs to be cleaned regularly to maintain hygiene. The suction nozzle can be removed (if it is detachable), rinsed with warm water to remove the remaining liquid and impurities. After rinsing, place it in a well-ventilated area to air dry naturally. Avoid direct sunlight or high-temperature drying to prevent deformation or damage. If the suction nozzle cannot be removed, gently wipe the inside and edges with a moist cotton swab to remove dirt.
Double-coil cleaning
The double coil is a core component of the equipment, and extra care should be taken when cleaning it. Regularly check whether there is carbon deposit or blockage in the coil. If carbon deposits are found, you can use a dedicated e-cigarette cleaning brush or a fine cotton swab to gently wipe the surface of the coil to remove the carbon deposits and residual e-liquid. When operating, apply gentle force to avoid damaging the coil structure. For stubborn carbon deposits, the device can be inverted, and a small amount of special cleaning solution (or diluted white vinegar) can be dropped into the suction nozzle. Wait for a moment to let the cleaning solution dissolve the carbon deposits, then wipe with a cotton swab, and finally rinse with clean water and let it dry. However, it should be noted that the cleaning solution should not be excessive to avoid flowing into the equipment and causing damage.
Key points for maintenance
Avoid overuse
Although the Fumot Tornado 35K is designed for long-term use, excessive continuous suction can cause the coil to overheat, accelerating aging and damage. It is recommended to have an interval of 10 to 15 seconds between each suction to allow the coil time to dissipate heat. Avoid prolonged continuous use and give the equipment appropriate rest time, which can extend the service life of the double coil.
Store correctly
When the equipment is not in use, it should be stored in a dry and cool place, avoiding direct sunlight and high-temperature environments. High temperature will deteriorate the e-liquid and affect the performance of the coil. A humid environment may cause the coil to rust or short circuit. At the same time, it is necessary to prevent the equipment from being squeezed or collided to avoid damaging the internal coil structure.
Regular inspection
Regularly inspect the overall condition of the equipment, including whether the connection between the double coils and the equipment is loose, and whether the battery and the remaining liquid display are normal, etc. Check the appearance of the coil for any deformation or damage. If any abnormality is found, contact after-sales service promptly for handling. In addition, attention should be paid to the performance of the equipment, such as whether there are significant changes in smoke volume and flavor. If there are any abnormalities, it might be a problem with the coil, and further investigation and maintenance are required.
Moisture-proof and waterproof
Moisture is the archenemy of electronic devices. It is necessary to avoid Fumot Tornado 35K coming into contact with moisture. Prevent liquid from splashing into the equipment when in use; If it accidentally gets wet, immediately wipe it dry with a dry cloth and let it air dry in a well-ventilated place before using it again. In a humid environment, it is advisable to consider using auxiliary tools such as moisture-proof bags to store the equipment and protect the double coils and other internal components.
Through the above cleaning and maintenance methods, the service life of the Fumot Tornado 35K dual-coil can be effectively prolonged, the stable performance of the equipment can be maintained, and a high-quality vaping experience can be continuously brought to users.